Blog

How To Get Water Out Of Charging Port?

The industrial revolution had many grave consequences for mankind, but one thing we can thank it for is the invention of technologies that use different sources of energy.

Electricity is the form of energy, and electronic devices are the devices that use electricity. These so-called electronic items may seem inefficient or even frail, but they can perform many tasks effectively and correctly.

To add, water being an enemy of electronic devices can cause major damage when they come into contact with it. This often causes short circuiting and brick the device.

On the other hand, in order to operate at their optimal level, these devices also need access to a power source that can recharge them when they are depleted.

It was really nerve-wracking when one tiny drop of water could interfere with my phone’s battery life.

Henceforth, I am assuming that if you are reading this article, then you may be an unlucky individual who has experienced a similar ordeal. If so, it might interest you to know how to get rid of water stuck in the charging port.

Worry not, for this article will make everything clear for you. Just scroll down and it’ll all be sorted out in no time at all – take my word for it!

Things To Keep In Mind

Here are some tips to make these next few weeks easier for yourself

Don’t Panic

Whether you’re panicking about your personal property or something larger than life, there’s no need to panic. If you follow through with that, you will only make matters worse for everyone around you.

To avoid making foolish decisions when you’re angry or upset, take some time to cool off and think about the situation rationally.

By adopting this mindset, you can avoid needing any outside help because you are able to do as much damage control possible.

Avoid Unnecessary Tools

It is best advised that you avoid the temptation of using needles or even cotton swabs because they might actually cause more harm than good.

As these delicate devices can easily get stuck, break or even get lodged in the port- and thereby cause more damage – you must be cautious of how you handle them.

Turn Off Your Device

As mentioned before, if it’s your laptop or mobile phone that has had their charger ports soaked by water, then most of them will experience the same problems when the electrical charges expand inside their bodies.

To ensure the safety of electronic devices, it is recommended that they are turned off rather than left running if they are going to be subjected to harsh conditions such as high heat.

If you’ve had your phone or laptop near water, don’t try turning it on right away. They might work for a bit – but the longer you wait before using them again, the more likely they are to survive!

Don’t Shake it

There is no such thing as shaking your phone back to life when there are water droplets spilt on it. Doing so will only push the liquid even further into the inner workings–the last thing you would want in your life.

How To Get Water Out Of Charging Port

Here are some potential solutions that may prove helpful.

Use Silica Gel Pouches

You read it correctly, I’m referring to those silica gel packs that you often find inside your medication bottles. They make sure they stay dry and fresh at all times, even during changes in temperature or humidity.

These Silica gel pouches are constructed to absorb any humidity from the air or nearby objects. They work efficiently in completing this task.

Place your phone in a ziplock bag and fill it with siliac gel pouches. These are available at medical stores.

Use A Blow Dryer

Not the most appealing way of doing things, but it gets the job done by drying any residual liquid that may have come in contact with the charging port.

When choosing a setting for your blowdryer, take care to set it on the coldest setting possible. The heat from the drying device could cause harm or melting of nearby materials if it is too hot.

Place in a Rice Bowl

I admit that tiny pieces of rice might sneak into the crevices of your mobile, but when it comes down to a choice between a phone dying or getting some dirt in the charging port – there’s no contest.

If you’re not a fan of that technique, simply put your phone in a ziplock bag filled with rice and let it absorb any moisture.

Let It Evaporate

It’s always safer to let Mother Nature do her job- and she does it well. When we have problems with unwanted liquid on our phones, the best way to fix it is by using the natural process of evaporation.

But, keep in mind that this process does not happen quickly and you may have to wait for a few hours depending on what the ambient temperature is where you are located. Evaporation needs time to happen.

Technical Care Center Or Repair Shop

It is highly recommended that you take your phone or laptop to a nearby repair shop and let them fix it for you.

Moreover, if you are lucky enough, you might be able to take your phone to the original manufacturer’s repair center and get it fixed for next to nothing. If that doesn’t work out either, then it would probably be worth paying a little bit of money but know that this too shall pass soon.

Bottom Line

It is understandable that getting your phone stolen can add stress to a person’s life, especially if the phone was very expensive or had important data on it. However, in no circumstance should you panic when this happens because then things will just go worse than they already are.

Follow my methods listed below on how to extract water from the USB port of your device, and you will be able to save it from being fried soon.

As always, make sure you are safe when using your devices and take care to protect them from many potential hazards. Global inflation may be unfavorable for those who can’t afford it.

About the author

waqas ali

Leave a Comment